The OutDo production floor near Pune, with panels moving between machines

Our manufacturing

One drawing. Three materials. One manufacturing setup.

OutDo makes commercial furniture in its own manufacturing setup near Pune. Wood, metal and aluminium are made in-house, the approved drawing drives production, and every part of an order is coordinated together.

Discuss a project Visit our manufacturing setup

WoodworkMetal & fabricationAluminiumISO 9001:2015

00 / Overview

Our factory, unit by unit

Three units near Pune. Wood, metal and aluminium are made in-house; glass and hardware are bought in and tracked with the rest of the order.

~26,000 sq ft in three units

Unit 01 · ManufacturingWoodwork~15,000 sq ft2 production lines
Unit 02 · ManufacturingMetal & fabrication~7,000 sq ftLaser pipe + sheet cutting
Unit 03E-commerce plant~4,000 sq ftFor the e-commerce business

2 shifts7 AM to 2 AM
80+ peopleIn-house, from drawing to installation
ISO 9001:2015For commercial, office and home furniture

Areas are approximate.

01 / Wood

Wood: cut, edged and drilled to the program

Engineered boards are laminated, cut, edge-banded and drilled, and every step runs from the approved drawing.

01 / Lamination
Laminate pressed onto boards in-house, before processing.
Hot and cold presses
02 / Cutting
Every panel cut to the program's exact size.
Beam saw
03 / Edge-banding
A clean, sealed edge on every panel.
Edge-banders
04 / Drilling
Holes line up, so parts assemble cleanly on site.
CNC + six-side drilling

What it makes

Workstations
Storage
Cabin & office tables
Conference tables
Collaborative tables
Reception
Institutional furniture

Premium pieces

Premium pieces, made here

The details that make a space feel finished, made in our own factory near Pune.

Handleless shuttersShaped and banded in our own factory.A finger-pull is formed into the shutter itself, so storage needs no handle.Profile edge-bander

Curvilinear edge-bander with an operator in the OutDo factory — Curved edgesRound and curved tops and panels, with a finished edge.Curvilinear edge-bander

Laser-cut metalPremium legs and frames, including our own designs, laser-cut in Pune. See metal

02 / Metal

Metal: legs and frames, laser-cut in-house

~7,000 sq ftMetal and fabrication unit
Laser pipe cuttingTubes cut to the drawing
Laser sheet cuttingSheet parts cut to the drawing
Legs, frames and metal partsIncluding OutDo's own designs

The OutDo metal and fabrication unit — The metal and fabrication unit

03 / Aluminium

Aluminium: partition work, made in-house

Aluminium partition work is made in our own manufacturing setup, and planned from the same approved drawing as the wood and the metal.

What it delivers

A.1In-houseMade by our own team
A.2Same drawingPlanned with the wood and metal
A.3One orderTracked with every other part

04 / Drawing to machine

What happens between an approved drawing and the finished piece

Our drawings are made in production software (Spazio 3D). The same approved drawing produces everything the floor needs.

Approved drawing
Cut list
Machine program
Panel label
Assembly file

01The drawing becomes the cut list.
Every panel of every product, with its size, comes from the approved drawing.
02The programs drive the saw and the drills.
The program is on the machine before the project reaches it; no one has to work out a measurement.
03Every panel gets a printed label.
The code, the client, the product and which panel it is, so any one piece can be found on the floor.
04An exploded assembly file shows where each numbered panel goes.
So an installer can put the product together as drawn.

Diagram for explanation, not a software screen.

Ask any maker

“Who writes your machine program: software from the approved drawing, or a person on the floor?”

05 / The floor

Walk the floor

The route a panel takes through the woodwork unit, from board to its project's dispatch zone.

Hot and cold presses in the OutDo woodwork unit

01 / Lamination

If plywood and laminate arrive separately, the laminate is pressed onto the boards first. Pre-laminated boards skip this step.

Beam saw with an operator in the OutDo woodwork unit

02 / Cutting + labelling

The program is already on the beam saw. As each piece is cut, a label is printed for it: the code, the client, the product and which panel it is.

Edge-banding line in the OutDo woodwork unit

03 / Edge-banding

From the saw, panels go to edge-banding, where every edge is banded and sealed.

Six-side drilling machine with an operator in the OutDo woodwork unit

04 / Drilling

CNC and six-side drilling from the program, so every part fits and assembles correctly.

Panels and the production team on the OutDo floor

05 / Sorting

Panels go to the sorting floor and are sorted item by item, so every order is complete.

Furniture packed per project in the OutDo factory

06 / Packing

Sorted material is packed, project by project.

Packed furniture in a project dispatch zone at the OutDo factory

07 / Project dispatch zone

The packed project waits in its own dispatch zone. Every project has a separate zone.

06 / Coordination

Every part of an order, ready together

The woodwork can be ready while the metal is pending, and that alone holds up a site. So every part of an order starts from the same drawing and is tracked together.

StartApproved drawing